Lenovo System x3250 M4 Installation And Service Manual page 46

Release tab
6. Touch the static-protective package that contains the new DVD drive to any unpainted metal surface on
the server; then, remove the DVD drive from the package and place it on a static-protective surface.
7. Follow the instructions that come with the DVD drive to set any jumpers or switches.
8. Remove the retention clip from the DVD drive filler.
9. Attach the drive retention clip (that comes with the DVD drive filler) to the side of the new DVD drive.
Drive retention clip
Alignment pins
10. Align the drive in the drive bay and slide the drive into the DVD drive bay until the drive clicks into place.
32
Lenovo System x3250 M4 Installation and Service Guide