Table of Contents
Advertisement
Attention: For proper cooling and airflow, replace the bezel and server cover before you turn on the server.
Removing the air baffle
Use this information to remove the air baffle from the server.
Read the safety information in "Safety" on page v and "Installation guidelines" on page 33.
If you are replacing a server component or an optional device in the server, you need to turn off the server
and peripheral devices, and disconnect the power cords and all external cables.
To remove the air baffle, complete the following steps.
Step 1.
Read the safety information that begins in the begin of this documentation.
Step 2.
Turn off the server and peripheral devices and disconnect the power cords and all external cables,
if necessary.
Step 3.
Remove the cover (see "Removing the cover" on page 131).
Step 4.
Grasp the air baffle; then, lift it up out of the server and set it aside.
Figure 36. Air baffle removal
Attention: For proper cooling and airflow, replace the air baffle before you turn on the server.
Operating the server with the air baffle removed might damage server components.
Replacing the air baffle
Use this information to replace the air baffle.
Read the safety information in "Safety" on page v and "Installation guidelines" on page 33.
If you are replacing a server component in the server, you need to turn off the server and peripheral devices,
and disconnect the power cords and all external cables.
To replace the air baffle, complete the following steps.
Air baffle
.
Chapter 6
Removing and replacing components
135
Advertisement
Table of Contents
Troubleshooting
