Base Charge Status; Base Power Communication Indicator; Reset Scanner - Honeywell Xenon 1900 User Manual

Red LED - Host Communication
Red LED
Short blinks in multiple pulses. Occurs while transferring
data to/from the RF module or the host port.

Base Charge Status

When charging, the base indicates the progress while the scanner resides in the
base.
Base Button/LED
Green on
Green slow blink
Green fast blink
Yellow fast blink
* The number of scans was measured with a clearly printed UPC code in good light.
The approximate number of scans varies with changes in label quality, symbology,
and environmental factors.

Base Power Communication Indicator

To display the power indicator on a base, scan the Base Power Communication
Indicator On bar code. To turn off the power indicator, scan the Off bar code.
Default = On.

Reset Scanner

Scanning this bar code reboots the scanner and causes it to relink with the base.
Xenon/Granit User Guide
* Base Power Communication
Indicator On
Charge Level
100%
50-99%
30-50%
0-30%
Reset Scanner
Communication
Condition
Receiving/sending data
Approximate Expected
Scans*
450
200
100
Charging - do not scan
Base Power Communication
Indicator Off
87