Gs1 Databar Expanded; Trioptic Code - Honeywell Xenon 1900 User Manual

GS1 DataBar Expanded

GS1 DataBar Expanded On/Off
GS1 DataBar Expanded Message Length
Scan the bar codes below to change the message length. Refer to
Description
lengths = 4-74. Minimum Default = 4, Maximum Default = 74.
Minimum Message Length

Trioptic Code

Note: If you are going to scan Code 32 Pharmaceutical codes
must be off.
Trioptic Code is used for labeling magnetic storage media.
212
< Default All GS1 DataBar Expanded Settings >
* On
(page 178) for additional information. Minimum and Maximum
On
Off
Message Length
Maximum Message Length
(page 183), Trioptic Code
* Off
Xenon/Granit User Guide