Mount a CCB01-010BT-V1N Charge Base
Reading Techniques
The scanner has a view finder that projects a bright red aiming dot that corre-
sponds to the scanner's horizontal field of view. The aiming dot should be centered
over the barcode, but it can be positioned in any direction for a good read.
The aiming dot is smaller when the scanner is closer to the code and larger when it
is farther from the code. Symbologies with smaller bars or elements (mil size)
should be read closer to the unit. Symbologies with larger bars or elements (mil
size) should be read farther from the unit. To read single or multiple symbols (on a
page or on an object), hold the scanner at an appropriate distance from the target,
press the trigger, and center the aiming dot on the symbol. If the code being
scanned is highly reflective (e.g., laminated), it may be necessary to tilt the code up
15° to 18° to prevent unwanted reflection.
Voyager XP User Guide
2.8 in.
72.1mm
3.35 in.
85.09mm
Linear barcode
2.36 in.
59.84mm
8x32 thread
x .39 in. (10mm) deep
2D Matrix symbol
7