Rs232 Modifiers; Rs232 Baud Rate - Honeywell Xenon 1900 User Manual

Automatic Direct Connect Mode: This selection can be used if you have an IBM AT
style terminal and the system is dropping characters. Default = Off.

RS232 Modifiers

RS232 Baud Rate

Baud Rate sends the data from the scanner to the terminal at the specified rate.
The host terminal must be set for the same baud rate as the scanner. Default =
115,200.
34
Numeric Keypad Mode On
Automatic Direct Connect
Mode On
300
1200
* Numeric Keypad Mode Off
* Automatic Direct Connect
Mode Off
600
2400
Xenon/Granit User Guide