Batch Mode Beep; Batch Mode Storage - Honeywell Xenon 1900 User Manual

Batch Mode Beep

When scanning in
bar code is scanned. When Batch Mode Beep is On, you will also hear a click when
each bar code is sent to the host. If you do not want to hear these clicks, scan Batch
Mode Beep Off. Default = Batch Mode Beep On.

Batch Mode Storage

When a scanner is storing data during a Batch Mode process, you can select
whether the data is stored in Flash memory or in RAM.
Flash Storage: The scanner writes any untransmitted data to flash memory prior to
powering down. The data will still be there when the scanner powers back up. How-
ever, the scanner will power down, even with untransmitted data, if it reaches a
power down timeout or if the instant charge pack power is very low.
RAM Storage: The scanner will not power down while it contains data that has not
been transmitted to the base, even if it reaches a power down timeout. However, if
the scanner charge pack runs out of power, it will power down and the data will be
lost.
Default = Flash Storage.
Xenon/Granit User Guide
Inventory Batch Mode
Inventory Batch Mode
Batch Mode Beep Off
* Flash Storage
(page 99), the scanner beeps every time a
Automatic Batch Mode
Persistent Batch Mode
* Batch Mode Beep On
99