Keyboard Modifiers - Honeywell Xenon 1900 User Manual

Keyboard Modifiers

This modifies special keyboard features, such as CTRL+ ASCII codes and Turbo
Mode.
Control + X (Control + ASCII) Mode On: The scanner sends key combinations for
ASCII control characters for values 00-1F. Windows is the preferred mode. All key-
board country codes are supported. DOS mode is a legacy mode, and it does not
support all keyboard country codes. New users should use the Windows mode.
Refer to
Windows Mode Prefix/Suffix Off: The scanner sends key combinations for ASCII
control characters for values 00-1F, but it does not translate prefix or suffix infor-
mation.
Default = Control + X Mode Off.
DOS Mode Control + X Mode On
Turbo Mode: The scanner sends characters to a terminal faster. If the terminal
drops characters, do not use Turbo Mode. Default = Off.
Numeric Keypad Mode: Sends numeric characters as if entered from a numeric
keypad. Default = Off.
Xenon/Granit User Guide
ASCII Conversion Chart (Code Page
Windows Mode Control + X
Mode On
Turbo Mode On
1252), page 330 for CTRL+ X Values.
* Control + X Mode Off
Windows Mode Prefix/Suffix
* Turbo Mode Off
33