Interleaved 2 Of 5 - Honeywell Xenon 1900 User Manual

Interleaved 2 of 5

Interleaved 2 of 5 On/Off
Check Digit
No Check Digit indicates that the scanner reads and transmits bar code data with
or without a check digit.
When Check Digit is set to Validate, but Don't Transmit, the unit only reads Inter-
leaved 2 of 5 bar codes printed with a check digit, but will not transmit the check
digit with the scanned data.
When Check Digit is set to Validate and Transmit, the scanner only reads Inter-
leaved 2 of 5 bar codes printed with a check digit, and will transmit this digit at the
end of the scanned data. Default = No Check Digit.
Xenon/Granit User Guide
< Default All Interleaved 2 of 5 Settings >
* On
* No Check Digit
Validate and Transmit
Off
Validate, but Don't Transmit
185