Streaming Presentation In-Stand; Mobile Phone Read Mode - Honeywell Xenon 1900 User Manual

When using
centered on the aiming pattern to be read in Streaming Presentation Mode.
Note: If you are using a cordless charge base, it must have an external power supply
plugged into the aux port for Streaming Presentation to work properly.

Streaming Presentation In-Stand

This option is available when using
gram a specific Streaming Presentation Mode for in-stand scanning, and a Manual
Trigger mode for out-of-stand scanning. To do this, you must first scan the pre-
ferred Streaming Presentation mode (Normal, Enhanced, or Mobile Phone), then
scan the Manual Trigger mode (Normal, Enhanced, or Mobile Phone) you want to
use.

Mobile Phone Read Mode

When this mode is selected, your scanner is optimized to read bar codes from
mobile phone or other LED displays. However, the speed of scanning printed bar
codes may be slightly lower when this mode is enabled. You can enable Mobile
Phone Reading for either a hand held device, or for a hands-free (presentation)
application.
Note: Granit 1980i and 1981i do not support these settings.
Hand Held Scanning - Mobile
Note: To turn off Mobil Phone Read Mode, scan a Manual or Serial Trigger Mode bar code
(see page 117).
Xenon/Granit User Guide
Streaming Presentation
Mode - Normal
Preferred Symbology
Phone
(page 5-134), a lower priority symbol must be
In-Stand Sensor Mode, page 122. You may pro-
Streaming Presentation
Mode - Enhanced
Streaming Presentation -
Mobile Phone
125