Nec 2 Of 5 Message Length; Code 93 - Honeywell Xenon 1900 User Manual

When Check Digit is set to Validate and Transmit, the scanner only reads NEC 2 of
5 bar codes printed with a check digit, and will transmit this digit at the end of the
scanned data. Default = No Check Digit.

NEC 2 of 5 Message Length

Scan the bar codes below to change the message length. Refer to
Description
lengths = 2-80. Minimum Default = 4, Maximum Default = 80.
Minimum Message Length

Code 93

Code 93 On/Off
Xenon/Granit User Guide
* No Check Digit
Validate and Transmit
(page 178) for additional information. Minimum and Maximum
* On
< Default All Code 93 Settings >
Validate, but Don't Transmit
Message Length
Maximum Message Length
187