Honeywell Xenon 1900 User Manual page 25

3. If you are connecting a Granit scanner, make sure the cable is pushed tightly
Note: The power supply must be ordered separately, if needed.
4. If you are connecting a CCB01-010BT or CCB01-010BT-BF Base, make sure
5. Turn the terminal/computer power back on. The scanner beeps.
6. Verify the scanner or cordless base operation by scanning a bar code from the
Xenon/Granit User Guide
into the scanner. Loosen the locking plate and slide it over the base of the cable
connector to lock the cable in place. Tighten the screw.
CCB01-010BT/CCB01-010BT-BF Base
Keyboard Wedge Connection:
CCB02-100BT/CCB05-100BT Base
Keyboard Wedge Connection:
the cables are secured in the wireways in the bottom of the cordless base and
the base sits flat on a horizontal surface. If you are connecting a CCB02-100BT
or CCB05-100BT Base, see
page 9.
Sample Symbols, beginning on page 339. The scanner beeps once. If using a
Granit scanner, it also vibrates.
Mount a CCB02-100BT/CCB05-100BT Base on
5