EAN/JAN-8
EAN/JAN-8 On/Off
EAN/JAN-8 Check Digit
This selection allows you to specify whether the check digit should be transmitted
at the end of the scanned data or not. Default = On.
EAN/JAN-8 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-8 data.
Default = Off for both 2 Digit and 5 Digit Addenda.
Xenon/Granit User Guide
* On
* On
2 Digit Addenda On
<Default All EAN/JAN-8 Settings>
Off
Off
* 2 Digit Addenda Off
207