Mounting A Ccb01-010Bt Charge Base; Reading Techniques - Honeywell Voyager 1450g Series User Manual

Mounting a CCB01-010BT Charge Base

Reading Techniques

The scanner has a view finder that projects a bright red aiming beam or pattern that corresponds to the scanner's horizontal
field of view. The aiming beam or pattern should be centered over the bar code, but it can be positioned in any direction for a
good read.
Linear bar code
Voyager 1450/1452
The aiming beam or pattern is smaller when the scanner is closer to the code and larger when it is farther from the code. Sym-
bologies with smaller bars or elements (mil size) should be read closer to the unit. Symbologies with larger bars or elements
(mil size) should be read farther from the unit. To read single or multiple symbols (on a page or on an object), hold the scanner
at an appropriate distance from the target, press the trigger, and center the aiming beam or pattern on the symbol. If the code
being scanned is highly reflective (e.g., laminated), it may be necessary to tilt the code up 15° to 18° to prevent unwanted reflec-
tion.
1 - 6
2.8 in.
72.1mm
3.35 in.
85.09mm
2D Matrix symbol
Voyager 1450/1452
2.36 in.
59.84mm
8x32 thread
x .39 in. (10mm) deep
Linear bar code
Voyager 1450g2DHR
2D Matrix symbol
Voyager 1450g2DHR