Table of Contents
Advertisement
Available languages
Available languages
Symbols on the device
Carefully read the operator
handling the machine. Observe instructions and
safety rules when operating.
Wear hard hat if there is a risk of falling parts.
Wear hard hat, eye and ear protection.
Wear protective gloves.
Wear safety shoes.
Keep children, bystanders and animals at a
distance from your working area. Safety distance
at least 15 m.
Be aware of kickback.
Make sure that the cutting head cannot contact
any foreign objects during starting and operation.
Danger
objects may be thrown out at high
–
speed.
Risk of injury at feet by contact with the cutting
tool at a no-covered area.
Petrol and oil are a fire hazard and can explode.
Fire, open light and smoking are prohibited.
max. speed of
thread spool
max. speed of cutting blade 7000 rpm
Warning of hot surfaces. Danger of burning!
Do not touch hot engine parts. Such parts may
remain hot for a short time even after the machine
has been stopped.
Risk of carbon monoxide poisoning.
Do not start or operate the engine in closed rooms
even if doors and windows are open.
Fuel (gasoline)
Engine started:
Engine switched off: O
Cold
Starting position: Choke position for
start
Operating position: Choke position for "warm start
Warm
and working"
start
This product complies with European regulations
specifically applicable to it.
20
s manual before
'
6600 rpm
I
cold start
"
Guaranteed Sound power level L
according to 2000/14/EG.
Symbols original instructions
Threatened hazard or hazardous situation. Not
observing this instruction can lead to injuries or cause
damage to property.
Important information on proper handling. Not
observing this instruction can lead to faults.
User information. This information helps you to use
all the functions optimally.
Assembly, operation and servicing. Explanation of
what exactly needs to be done.
Important notes for environmentally compatible
conduct. Failure to observe these instructions may
lead to environmental damage.
Please refer to the attached assembly and operating
instruction sheet for references to figure numbers in
the text.
Before initiating the device please observe the provisions
pertaining to corresponding laws (regional provisions) for
the noise control.
Information on how to avoid noise:
Some noise exposure from this machine is unavoidable.
Schedule noisy work to times during which it is allowed.
Respect all rest times and restrict the work duration to the
minimum. You as the operator and bystanders should wear a
suited hearing protection.
• This brush cutter may only be used for mowing grass and for
cutting shrubbery and brushwood (of max. Ø 13 mm) in
private households.
• This grass trimmer is designed for cutting grass and similar
soft vegetation and for trimming lawn edges in private and
hobby garden areas which are not accessible with a
lawnmower.
• The device is not allowed to be used in public gardens,
parks, sports centres or at roadsides as well as in agriculture
and forestry.
This brush cutter/ grass trimmer is not allowed to
•
be used for cutting or chopping:
"
− hedges, shrubs and bushes,
− flowers,
− in terms of composting.
Otherwise, there is a risk of injury.
• The intended usage also includes compliance with the
assembly, operating, servicing and repair conditions
WA
Operating hours
Proper use
113 dB (A),
Advertisement
Chapters
Table of Contents
