Starting And Stopping - SMC Networks HRSH090-A Operation Manual

4.4 Starting and Stopping

4.4.1 Starting the product
Allow at least five minutes before restarting the product.
1.
Press the [RUN/STOP] key on the operation panel.
The [RUN] lamp lights up (in green) and the product starts running. The circulating
discharge temperature (PV) is controlled to the set temperature (SV).
Press
When an alarm occurs, refer to "Chapter 7
shooting''.
HRSH Series
Before starting, check the items specified in "4.1 Before Starting"
If any alarm lamp remains on, refer to Chapter 7 Alarm indication and
trouble shooting"
ON
Fig. 4-8 Starting the product
Chapter 4 Starting the Product
Alarm indication and trouble
4.4Starting and Stopping
HRX-OM-R026
4-7