SMC Networks HRSH090-A Operation Manual page 67

Display
Changing of pump operation mode
Circulating fluid discharge pressure
Pump operation frequency
Warming up function
Warming up temperature setting
Unused
Dust-proof filter accumulated time reset
Unused
Alarm buzzer sound
Changing of low tank level
Changing of circulating fluid discharge
temperature rise
Detection temperature for circulating fluid
discharge temperature rise
Changing of circulating fluid discharge
temperature drop
Detection temperature for circulating fluid
discharge temperature drop
Changing of circulating fluid discharge
pressure rise
Detection pressure for circulating fluid
discharge pressure rise
Changing of circulating fluid discharge
pressure drop
Detection pressure for circulating fluid
discharge pressure drop
Changing of communication error
The monitoring time of communication error
Changing of
detection
Changing of
detection
Changing of DC line fuse cut
Unused
Unused
Unused
Unused
Unused
Temperature alarm monitoring method
Monitoring start timer
Range over
Detection timer
Compressor stop alarm
: Values in ﾟ F are displayed when SE12 is F and PSI are displayed when SE13 is PSI.
5: The default setting when SE24 is FREQ.
6: The default setting when SE27 is ON.
7: Regarding the detail of the default setting, refer to "5.20
HRSH Series
Chapter 5
Table 5.2-2 List of parameter (2/3)
Content
Contact input signal 1
Contact input signal 2
Alarm customizing function
Display and setting of various functions
Reference
Default setting4
PRS
0.50MPa (72PSI)
(----)*5
---- (40)5
OFF
----
o
C (68.0 ﾟ F)6
(20.0
----
NO
(67)
ON
A.RUN
A.RUN
o
C (113.0 ﾟ F)
45.0
(----)7
A.RUN
o
C (33.8 ﾟ F)
1.0
(----)7
A.STP
0.55MPa (80PSI)
(----)*7
A.STP
0.05MPa (7PSI)
(----)*7
OFF
---- (30)7
A.STP
A.STP
A.STP
----
----
----
----
----
0
---- (0)7
5
P.RUN
HRX-OM-R026
Category
page
5.17
Setting
menu
5.18
5.16
5.19
Alarm setting
menu
5.20
".
5.2Function
5-5