SMC Networks HRSH090-A Operation Manual page 121

29.
Select the changing of DC line fuse cut from the table below with [▲] key or [▼] key,
and confirm by pressing "SEL".
Set value
How to monitor the temperature alarm Setting and Checking
30.
Press the [SEL] key once.
Setting screen of the temperature alarm monitoring method is displayed on the digital
display.
PV
SV
31.
Select temperature alarm monitoring method from the table below with [▲] key or [▼]
key, and confirm by pressing "SEL".
Set value Item
Continuous
monitoring
Automatic
monitoring
Monitoring
timer
Automatic
monitoring
Monitoring
timer
Settings of this function and example of alarm generating timing for 5.15.3 "Setting of temperature alarm
monitoring method and generation timing".
HRSH Series
Table 5.20-21 List of set value
Explanation
Operation continues when this alarm signal is
generated.
Operation is stopped when this alarm signal is
generated.
Table 5.20-22 List of set value
Alarm monitoring starts at the same time as
operation starts.
When the circulating fluid temperature is
outside of the alarm threshold range at the
time of operation start, the alarm will not be
generated until the temperature comes
inside the alarm threshold range.
Alarm will not be generated until it reaches
the time set for the AS.22 "Monitoring start
start
timer" after the operation starts.
Alarm monitoring starts when it reaches the
set time.
Alarm will not be generated until it reaches
the time set for the AS.22 "Monitoring start
timer" after the operation starts.
Alarm monitoring starts when it reaches the
+
set time.
start
When the circulating fluid temperature
enters the alarm threshold range before it
reaches the set time, the alarm monitoring
will be started at that time.
Chapter 5 Display and setting of various functions
Explanation
HRX-OM-R026
Initial value
(Default setting)

Initial value
(Default setting)

5.20Alarm customizing function
5-59