SMC Networks HRSH090-A Operation Manual page 127

43.
Select the changing of fan maintenance from the table below with [▲] key or [▼] key,
and confirm by pressing "SEL".
Set value
Changing of compressor maintenance Setting and checking
44.
Press the [SEL] key once.
The set screen of the changing of compressor maintenance is displayed on the digital
display.
PV
SV
45.
Select the changing of compressor maintenance from the table below with [▲] key or
[▼] key, and confirm by pressing "SEL".
Set value
Changing of dust-proof filter maintenance Setting and checking
46.
Press the [SEL] key once.
The set screen of the changing of dust-proof filter maintenance is displayed on the
digital display.
SV
47.
Select the changing of dust-proof filter maintenance from the table below with [▲] key
or [▼] key, and confirm by pressing "SEL".
Set value
HRSH Series
Table 5.20-29
Explanation
This alarm signal is not detected.
Operation continues when this alarm signal is
generated.
Table 5.20-30
Explanation
This alarm signal is not detected.
Operation continues when this alarm signal is
generated.
Table 5.20-31
Explanation
This alarm signal is not detected.
Operation continues when this alarm signal is
generated.
Chapter 5 Display and setting of various functions
List of set value
(Default setting)
List of set value
(Default setting)
List of set value
(Default setting)
HRX-OM-R026
Initial value

Initial value

Initial value

5.20Alarm customizing function
5-65