SMC Networks HRSH090-A Operation Manual page 120

HRX-OM-R026
Chapter 5 Display and setting of various functions
25.
Select the changing of contact input signal 1 detection from the table below with [▲]
key or [▼] key, and confirm by pressing "SEL".
Set value
Changing of Contact input signal 2 detection Setting and checking
26.
Press the [SEL] key once.
The set screen of the changing of contact input signal 2 detection is displayed on the
digital display.
PV
SV
27.
Select the changing of contact input signal 2 detection from the table below with [▲]
key or [▼] key, and confirm by pressing "SEL".
Set value
Changing of DC line fuse cut Setting and checking
28.
Press the [SEL] key once.
The set screen of the changing of DC line fuse cut is displayed on the digital display.
PV
SV
5.20 Alarm customizing function
5-58
Table 5.20-19 List of set value
Explanation
This alarm signal is not detected.
Operation continues when this alarm signal is
generated.
Operation is stopped when this alarm signal is
generated.
Table 5.20-20 List of set value
Explanation
This alarm signal is not detected.
Operation continues when this alarm signal is
generated.
Operation is stopped when this alarm signal is
generated.
Initial value
(Default setting)

Initial value
(Default setting)

HRSH Series