HRX-OM-X027
Chapter 4
Starting the Product
4.4 Starting and Stopping
4.4.1
Starting the product
Allow at least five minutes before restarting the product.
1.
Press the [RUN/STOP] key on the operation panel.
The [RUN] lamp lights up (in green) and the product starts running. The circulating
discharge temperature (PV) is controlled to the set temperature (SV).
Press
When an alarm occurs Refer to "Chapter 7 Alarm indication and trouble shooting''
4.4 Starting and Stopping
4-6
Before starting, check the items specified in "4.1 Before Starting"
If any alarm lamp remains on, refer to Chapter 7 Alarm indication and
trouble shooting"
ON
Fig. 4-8 Starting the product
HRS-R Series