SMC Networks HRSH090-A Operation Manual page 143

Contact output signal 2 operation Setting and checking
53.
Press the [SEL] key once.
The set screen of contact output signal 2 operation is displayed on the digital display.
PV
SV
54.
Select contact output signal 2 operation from the table below with [▲] key or [▼] key,
and confirm by pressing "SEL".
Set value
Digital output signal 2 selected alarm Setting and checking
55.
Press the [SEL] key once.
The set screen of contact output signal 2 selected alarm is displayed on the digital
display.
PV
SV
56.
Select contact output signal 2 selected alarm from the table below with [▲] key or [▼]
key, and confirm by pressing "SEL".
Set value
to
Contact output signal 3 function Setting and checking
57.
Press the [SEL] key once.
The set screen of contact output signal 3 function is displayed on the digital display.
PV
SV
HRSH Series
Table 5.21-28 List of set value
Explanation
N.O type
N.C type
Table 5.21-29 List of set value
Explanation
Setting/checking are not available unless the
function setting of digial output 2 is selected
alarm status signal.
Sets selected alarm
Set range is AL.01 to AL.48.
Chapter 5 Display and setting of various functions
(Default setting)
(Default setting)
HRX-OM-R026
Initial value

Initial value
5.21Communication function
5-81