62.
Select contact output signal 3 selected alarm from the table below with [▲] key or [▼]
key, and confirm by pressing "SEL".
Set value
to
63.
Press the [MENU] key once.
Return to the main screen (screen displaying the circulating fluid temperature).
PV
SV
HRSH Series
Table 5.21-32 List of set value
Explanation
Setting/checking are not available unless the
function setting of digial output 3 is selected
alarm status signal.
Sets selected alarm
Set range is AL.01 to AL.48.
Chapter 5
Display and setting of various functions
(Default setting)
HRX-OM-R026
Initial value
5.21Communication function
5-83