SMC Networks HRSH090-A Operation Manual page 38

HRX-OM-R026
Chapter 3 Transport and Setting Up
Name
Power supply output
Contact input signal 1
Contact input signal 2
1:
To use the power of the device, the total load current must be 500mA or less.
If the load is 500mA or more, the internal fuse will be cut to protect the product and the alarm [AL21 DC
line fuse cut] will be generated. Refer to Chapter 6 for handling of alarms.
2: Refer to 3.3.6 Wiring of external switch signal input.
1.
Prepare the switch (source voltage: 24V, contact capacity: 35mA or more, min. load
current: 5mA), and cable (Table 3-5 Signal cable).
3.3 Installation
3-18
Table 3-6 Power supply, contact specifications
Terminal NO.
5, 6, 7 (DC 24V)
13,14, 15 (24V COM)
3 (Contact input signal 1)
11 (Common of contact output signal 1)
4 (Contact input signal 2)
12 (Common of contact output signal 2)
Specification
DC 24V ±10% 500mA MAX
-Run/stop signal
Switch
input
input on the
-External switch
operation
 2
signal input
display panel.
-Run/stop signal
Refer to the
input
operation
-Remote signal
manual
input
communication
-External switch
function.
 2
signal input
 1
the
HRSH Series