SMC Networks HRSH090-A Operation Manual page 58

HRX-OM-R026
Chapter 4 Starting the Product
4.
Press the [RESET] key ([▼] and [▲] keys simultaneously) to reset the alarm.
The alarm (tank fluid level is low) is reset, and the [ALARM] lamp and [ ] lamp are
turned off. The display returns to the initial screen of the main menu: "Circulating fluid
temp. / Circulating fluid set temp." Press the [PUMP] key (press [RUN/STOP] key and
[MENU] key simultaneously) to start independent operation of the pump.
Be sure to reset the alarm on the operation display panel of the alarm. Alarm reset
is not accepted from any screen except the alarm display menu. Refer to 5.2.1 Key
operations.
OFF
OFF
5.
Repeat steps 1 to 4 to supply the circulating fluid to the customer's equipment and
piping. The tank level must be "H" on the tank liquid level indicator.
4.3 Preparation of circulating fluid
4-6
Fig. 4-7 Alarm release
Press together
HRSH Series
(
0
.
7
i
n
)
(
0
.
7
i
n
)
(
0
.
7
i
n
)