SMC Networks HRSH090-A Operation Manual page 47

 How to connect piping
Tighten the piping to each connection as follows below.
Circulating fluid return port
Circulating fluid outlet port
 How to connect to the drain port
Without holding the ball valve of the drain port with a wrench, the ball
valve may rotate and it may cause a fluid leakage and malfunction of
the product. Be sure to hold the ball valve of the drain por t.
HRSH Series
Drain port
Fig. 3-18 Tightening of piping
When piping the drain port, hold the ball valve of the drain port with a wrench
not to rotate it.
Fig. 3-19 Connection to the drain
Chapter 3
Note: Incase of using the Y
strainer of the accessory, fasten
it on the return port.
Clean the filer of the strainer
after the trial operation before
the proper operation
Sealant
Arrow direction of Y strainer
Connection port
Sealant
Hold the ball valve.
HRX-OM-R026
Transport and Setting Up
Note: Connect the strainer
so that the screen face
downward.
3.4Piping
3-27