Starting And Stopping; Starting The Product - SMC Networks HRSH200-A*-20 Series Operation Manual

4.4 Starting and Stopping

4.4.1

Starting the product

Allow at least five minutes before restarting the product.
1.
Press the [RUN/STOP] key on the operation panel.
The [RUN] lamp lights up (in green) and the product starts running. The circulating
discharge temperature (PV) is controlled to the set temperature (SV).
Press
When an alarm occurs, refer to "Chapter 6
shooting''
HRSH Series
Before starting, check the items specified in "4.1 Before Starting"
If any alarm lamp remains on, refer to Chapter 6 Alarm indication and
trouble shooting"
ON
Fig. 4-8 Starting the product
Chapter 4 Starting the Product
Alarm indication and trouble
4.4 Starting and Stopping
HRX-OM-Q026-B
4-7