SMC Networks HRSH090-A Operation Manual page 134

HRX-OM-R026
Chapter 5 Display and setting of various functions
18.
Select BCC (simple communication protocol) from the table below with [▲] key or [▼]
key, and confirm by pressing "SEL".
Set value
Data length (simple communication protocol) Setting and checking
19.
Press the [SEL] key once.
The set screen of data length (simple communication protocol) is displayed on the digital
display.
PV
SV
20.
Select data length (simple communication protocol) from the table below with [▲] key or
[▼] key, and confirm by pressing "SEL".
Set value
Parity check (simple communication protocol) Setting and checking
21.
Press the [SEL] key once.
The set screen of parity check (simple communication protocol) is displayed on the
digital display.
PV
SV
5.21 Communication function
5-72
Table 5.21-10 List of set value
Explanation
Setting/checking are not available unless the
serial protocol setting is simple
communication protocol.
Without BCC
With BCC
Table 5.21-11 List of set value
Explanation
Setting/checking are not available unless the
serial protocol setting
communication protocol.
7 bit
8 bit
Initial value
(Default setting)
Initial value
(Default setting)
is simple


HRSH Series