How To Confirm License Status; How To Delete A C-Map Chart Database; How To Install C-Map Dl (Dynamic Licensing) Charts; How To Generate, Order And Apply An Update File - Furuno FMD-3200 Operator's Manual

3. HOW TO MANAGE CHARTS
3.6.4

How to confirm license status

If you cannot display a C-MAP chart, follow the procedure below to check license sta-
tus. Database and license should be installed beforehand.
1. Get into the Chart maintenance mode, then click the [License] button on the
InstantAccess bar™.
2. Click the [C-MAP] tab to show the [Licenses] dialog box for C-MAP.
3. Click the [Check Signature] button. The results of the check appear in the [Result
of Check Signature] window, as [ok] or [Not ok]. For [Not ok], contact your C-MAP
dealer or C-MAP chart sales outlet for advice.
4. Click the [Ok] button to close the window.
3.7

How to Delete a C-MAP Chart Database

If you are going to delete all C-MAP chart databases, turn off chart synchronization
and delete the databases from each processor unit.
1. Get into the Chart maintenance mode then click the [License] button on the
InstantAccess bar™.
2. Click the [C-MAP] tab to show the [Licenses] dialog box for C-MAP.
3. Select the database(s) to delete with the [Database] pull-down list.
4. Click the [Delete Database] button, then reset the power.
3.8 How to Install C-MAP DL (Dynamic Licensing)
Charts
Register the eToken if it has not already been registered. See section 3.6.1.
3.8.1

How to generate, order and apply an update file

How to generate and order an update file
To update the C-MAP chart database, you have to create an update file, and
e-mail the file directly to C-MAP. The update file defines coverage of charts you can
display on your ECDIS.
1. Insert a USB flash memory to the USB port on the Control Unit.
2. Get into the Chart maintenance mode then click the [License] button on the
InstantAccess bar
3. Click the [C-MAP] tab to show the [Licenses] dialog box for C-MAP.
4. Click [Email Size], then select a file size from the drop-down box. The available
options are: [100KB], [200KB], [300KB], [400KB], [500KB], [750KB], [1MB],
[2MB], 3MB, [4MB], [5MB], [10MB], [Unlimited].
The option selected here sets the maximum file size for file attachments. The up-
date file will be divided into blocks according to the option set here.
5. Click the [Order Update File] button. A file name (C-MAP system ID and chart
type) is automatically created, with the extension .ord.
3-14
™
.