Voyage Data - Furuno FMD-3200 Operator's Manual

14.3

Voyage Data

Before you embark on a voyage, set your navigation status, ETA, destination, draught
and crew, on the [Voyage Data] page in the [NAV Status] menu. The data entered
here is reflected to the AIS transponder.
1. Open the menu, then click both [NAV Status] in the [TT/AIS] menu and the [Voy-
age Data] tab.
2. Click the [Navigational Status] drop-down list then select your navigational status,
from the list below.
• Underway using engine
• At anchor
• Not under command
• Restricted maneuverability
• Constrained by her draught
• Moored
• Aground
• Engaged in fishing
• Under way sailing
3. Enter the number of persons onboard (0 - 8191) at [Persons].
4. Enter ship's draught (0.0 - 25.5 (m)) at [MAX Draught].
5. Enter your ETA at [ETA], in UTC.
Day: two digits
Month: Three-character abbreviation
Year: Four digits
6. Enter your destination at [Destination], using a maximum of 20 characters.
7. Use the [Cargo Type] pull-down menu to specify the type of cargo your vessel is
carrying,
• All ships of this type
• Carrying DG, HS, or MP, IMO hazard or pollutant category X
• Carrying DG, HS, or MP, IMO hazard or pollutant category Y
• Carrying DG, HS, or MP, IMO hazard or pollutant category Z
• Carrying DG, HS, or MP, IMO hazard or pollutant category OS
• Reserved for future use (x4)
• No additional information
8. Click the [Save] button to register the settings. The settings are sent to the AIS
transponder.
Carrying DG, HS, or MP, IMO hazard or pollutant category
14. AIS TARGET FUNCTIONS
Displayed according to
connected AIS transponder
• Reserved for high speed craft
• Reserved for wing in ground
• Power driven vessel towing astern (regional
use)
• Power driven vessel pushing ahead or towing
alongside (regional use)
• Reserved for future use
• AIS-SART (active)
• Not defined
14-5