How Insert A Waypoint; How To Delete A Waypoint; Geometry Check Of Route - Furuno FMD-3200 Operator's Manual

9.5.4

How insert a waypoint

How to insert a waypoint between waypoints from the electronic chart area
1. Put the cursor anywhere on the route where you want to insert a waypoint.
2. Right-click to show the context-sensitive menu then click [Edit].
3. Put the cursor on the leg where you want to insert a waypoint.
4. Right click then click [Insert WPT].
5. Right click then click [Finish].
How to insert a waypoint from the Waypoints page
Open the [Waypoints] page then right-click the waypoint to process. Select [Insert af-
ter] or [Insert before] as appropriate. A waypoint is added after or before the waypoint
selected. Edit the Latitude, Longitude, etc. as necessary.
9.5.5

How to delete a waypoint

How to delete a waypoint from the electronic chart area
Put the cursor on the waypoint to delete. Push the right button to show the context-
sensitive menu then select [Edit] followed by [Delete WPT].
How to delete a waypoint from the Waypoints page
Open the [Waypoints] page. Right-click the waypoint you want to delete then select
[Delete WPT].
9.5.6

Geometry check of route

When you add a new waypoint, modify a waypoint or change other waypoint data, the
message "Impossible turn at WPT" may appear in red and the following items may
also appear in red.
• Turn radius or planned speed for the respective waypoint
• Latitude/longitude for the next waypoint
This means that the geometry of route makes it impossible for the ship to sail along a
certain leg. Typically it is enough if you do the following, on the [Waypoints] page.
• Decrease the radius of turn of the waypoint or one of its neighbors.
• Increase the radius of turn of the waypoint or one of its neighbors.
• Change lat/lon position of the waypoint or one of its neighbors.
Note: If the above-mentioned remedies do not remove the "Impossible turn at WPT"
indication, try changing the planned speed.
9. ROUTES
9-11