1. INTRODUCTION
1.10
How to Enter Ship Speed
The speed can be entered from a log (STW) or GPS (SOG), or manually on the menu.
Note that FURUNO GPS Navigator GP-150 provides both COG and SOG.
1. Right-click anywhere in the [Own ship information] box to show the context-sensi-
tive menu.
2. Click [Open MENU].
3. Click [System Sensor Settings] or [Local System Settings] as applicable.
4. Click the [SPD] tab.
Stabilization
mode
LOG/GPS
selection
1-10
Open MENU
Fill circle for automatic speed input
Set course and speed of drift
Check to use radar as source for speed and course
Fill circle for manual speed input
SPD page, local sensor
Speed sensor list