Chart Display Menu - Furuno FMD-3200 Operator's Manual

4. HOW TO CONTROL CHART OBJECTS
4.2.3

Chart Display menu

To access the [Chart Display] menu and its pages, click [DISP], [SET] and [Chart
DISP] on the InstantAccess bar
[NtoM] page as appropriate.
To access the [Chart Display] menu and its pages, click [DISP], [SET] and [Chart
DISP] on the InstantAccess bar
[NtoM] page as appropriate.
General page
This page turns chart features on (checkbox checked) or off.
Symbol: Determines how to display chart symbols.
- Paper Chart: Symbols displayed the same as the conventional paper chart symbols
- Simplified: Symbols displayed in simplified style, and the sea is displayed in color.
Boundaries: Determines how to show boundary lines of chart objects.
- Plain: Boundary line shown with solid and dashed lines.
- Symbolized: Symbol is attached to the line according to the purpose of the line.
Scale MIN: Set the minimum chart scale to display chart objects. When the chart scale
is lower than set here, the chart objects will not be displayed.
4-4
™
. then select [General], [Standard], [Other], [Text], or
™
then select [General], [Standard], [Other], [Text], or