22. Conning Displays; Main Conning Display - Furuno FMD-3200 Operator's Manual

Electronic chart display and information system

Hide thumbs Also See for FMD-3200:

Table of Contents

22. CONNING DISPLAYS

The main conning display provides relevant sensor information data (including engine

data) from external equipment, on one display to facilitate safe and efficient monitor-

ing. The ECDIS accepts sensor information data in analog, serial and contact signal

Six sets of conning displays are available, and they are arranged at installation. Con-

sult with the installer of the equipment to decide the content and layout of each display.

To show the conning display, click the Display mode button on the Status bar to select

Note: Analog data is shown in the lowest value of the setting range when the data is

Conning display Status bar (see next page)

Note: The cursor can be moved be-

tween the main monitor and a sub

monitor and vice versa if the sub

monitor is configured to show the

Conning display. Push the scroll-

wheel until the cursor moves to the

other monitor.

Main monitor

Fmd-3200-bb Fmd-3300