25. ALERT MANAGEMENT SYSTEM (option)
25.16 AMS Mode Operations
25.16.1 How to select the AMS mode
Select [AMS] with the Display mode button (the leftmost button on the Status bar) to
activate the AMS mode. The configuration of the button depends on the monitor con-
figuration.
Single monitor configuration and Display mode button
MAIN MONITOR
(ECDIS only)
Dual monitor configuration and Display mode button
25.16.2 AMS mode windows
The AMS mode shows alert information in three windows: [ACTIVE ALERT], [ALERT
LOG] and [ALERT LIST]. The windows can be selected with the corresponding but-
tons on the Status bar. Alerts can be acknowledged from any window, by clicking the
alert.
Window selection buttons
25-16
MONITOR
(ECDIS, Radar,
Conning or AMS)
EC-3000
SUB MONITOR
(Conning, Radar or
AMS)
EC-3000
EC-3000
Operating buttons, indications (See page 22-2.)
CONNING
CONNING
RADAR
AMS
E
E