How To Create A New Route - Furuno FMD-3200 Operator's Manual

9.4

How to Create a New Route

To make a complete route for a voyage, do the following:
1. Click the [PLAN] button on the Status bar to activate the Voyage planning mode.
(Sync source: ECD001)
2. On the InstantAccess bar
ton to open the [Route Plan] dialog box.
3. Click the [New] button.
Note: If, after pressing the [New] button, the database cannot be accessed, the
message "Database access failure occurred. You can make a route but cannot
save it." appears. In this condition you can make a route and use it for navigation,
but you cannot save it. Contact a FURUNO dealer for instruction.
4. Use the cursor to select a position for the first waypoint then push the left mouse
button. A waypoint mark appears on the position selected. The latitude and longi-
tude of the position are entered into the [Route Plan] dialog box. The waypoint
number appears in the [Waypoint] column. The latitude and longitude can be ed-
ited from the [Route Plan] dialog box. After entering a waypoint, you can edit
Name, Steering mode*, Radius*, Channel limit*, Plan SPD*, SPD Max*, and Mar-
gin*. (* For waypoint 2 and after only.) For how to edit data, see section 2.1.13.
Note 1: A guide box that shows the range and bearing between waypoints is avail-
able. You can show or hide the box with the [Guide Box] button on the InstantAc-
cess bar™. Click the button to show its background color in light-blue to display
the guide box.
Note 2: The bearing and range of the waypoint can be ad-
justed as shown below.
1) In the Route Plan dialog box, right click the bearing or
the distance of the waypoint to change.
2) Select [Adjust Position] to show the [Adjust Waypoint]
context menu shown right.
3) Enter value at [Direction] or [Distance], then click the
[OK] button.
™
, click the [Planning] button followed by the [Route] but-
9. ROUTES
Guide box
9-3