Reports - Furuno FMD-3200 Operator's Manual

9. ROUTES
9.13

Reports

This ECDIS generates reports for waypoints in the selected route. If connected to a
printer, reports can be printed by clicking the [Print Text] button. Text in reports can be
searched with the [Find] button.
To generate a report, do the following:
1. Click the [PLAN] button on the Status bar to go to the Voyage
planning mode.
2. Click the [Report] button followed by the [Route] button.
3. Click applicable "report" button - [WPT], [Full WPT] or [Pas-
sage] - to show the following dialog box.
4. Select the appropriate route then click the [Open] button to show the selected re-
port. See the next several pages for examples.
9-26
177.51NM