How To Export A List Of Charts; How To Export A List Of Specific Licenses - Furuno FMD-3200 Operator's Manual

3. HOW TO MANAGE CHARTS
• [Confirmation Date] is the date when you receive the confirmation answer for your
request via e-mail.
• [Confirm before open new chart], if checked, a confirmation window asks for con-
firmation before opening charts that require issuing a new license. A chart denied is
added to the list of protected charts, so the confirmation request will not be repeated
for that chart. Those charts cannot be opened until they are removed from the list
of protected charts.
• [Protected], if checked, shows the protected charts in the cell list. To remove a
chart from protection, select it then click the [Release] button. Then, when an at-
tempt is made to open that chart, the confirmation window appears. Note that mul-
tiple confirmation windows open when releasing multiple charts from protection.
3.9

How to Export a List of Charts

Get into the Chart maintenance mode, click the [Manage Charts] button on the
InstantAccess bar
to the list. Click the [Export List] button to export the checked charts to a USB flash
memory, in .txt format.
3.10

How to Export a List of Specific Licenses

You can export a list of your ENC, ARCS or C-MAP (excluding C-MAP DL) licenses
to a USB flash memory, in .txt format.
1. Set a USB flash memory in the USB port on the Control Unit.
2. Get into the Chart maintenance mode then click the [License] button.
3. Click the [ENC], [ARCS] or [C-MAP] tab.
4. Click the [Export List] button.
5. Change the file name at [File Name] if desired.
6. Select the USB flash memory then click the [Save] button.
7. Click the [OK] button to finish.
3-16
™
to show the [Manage Charts] dialog box. Check the charts to add