How To Install Arcs Licenses, Charts; How To Install An Arcs License - Furuno FMD-3200 Operator's Manual

4. When the installation is
completed, information
about the installation ap-
pears in the [Result] win-
dow. Click the [Confirm]
button to finish.
5. If applicable, set the next
sequential medium and
repeat steps 2-4 to install
the next charts.
6. After all necessary charts
are installed, reset the
power.
Note 1: When many charts are installed, the ECDIS checks for error in the installed
chart data at the next power up. This is not an indication of malfunction.
Note 2: Previous versions of charts cannot be displayed if installed after installing the
latest versions.
3.3

How to Install ARCS Licenses, Charts

3.3.1

How to install an ARCS license

An ARCS license can be installed automatically or manually. The procedure which fol-
lows is for automatic installation. For manual installation, see "Manual
installation" on page 3-3.
Note: Do not cancel the installation (with the [Cancel] button) while it is in progress.
Cancellation automatically resets the power, stopping the installation. If the power is
reset, try to install the charts again. If the installation fails, reset the power and try
again.
1. Insert the medium (DVD, USB flash memory, etc.) that contains the ARCS li-
cense.
2. Get into the Chart maintenance mode then click the [License] button on the
InstantAccess bar
Result
™
to show the [Licenses] dialog box.
3. HOW TO MANAGE CHARTS
3-5