Mariner Page - Furuno FMD-3200 Operator's Manual

4. HOW TO CONTROL CHART OBJECTS
4.3.4

Mariner page

Description
Labels: Check to show labels on user charts.
Lines: Check to show lines on user charts.
Clearing Lines: Check to show clearing lines (for marking dangerous areas) on user
charts.
Tidals: Check to show tidal symbols and tidal data on user charts.
Areas: Check to show areas on the user charts.
Circles: Check to show circles on user charts.
Density: Set the degree of transparency for the user chart objects. Color fill for the
areas can be chosen as transparent from 0%, 25%, 50% or 75%. Select [0%] to show
only boundary lines.
Display user chart symbol name: Check to display on the chart the name entered
for a user chart symbol in the [Name] column of the [User Chart] dialog box. Effective
for the circle and area symbols only. Names are shown in both the Voyage planning
and Voyage navigation modes. See the figure below for examples.
NAVTEX: This item is valid when [Navtex Receiver] is made available in the installa-
tion. Check this item to show the MSI mark at the location of the position information
contained in a Navtex message. See the illustration at the top of the next page for the
information in a Navtex message.
4-10
Name as entered in [Name] column.
Wreck
Reef