The Settings Menu; How To Manage User Profiles; How To Create A Profile; How To Disable A Profile - Furuno FMD-3200 Operator's Manual

1.15

The Settings Menu

The [Settings] button gives you access to the user profiles and the [Settings] menu.
The [Settings] menu has facilities for screenshot management, file management, di-
agnostic tests and customizing. See chapter 23.
[Settings]
button
1.16

How to Manage User Profiles

Ten sets of [Chart Display], [Symbol Display] and [Chart Alert] menu settings can be
stored in user profiles for later retrieval.
1.16.1

How to create a profile

1. Set the [Chart Display], [Symbol Display] and [Chart
Alert] menus as desired.
2. Click [
file].
3. Select a profile number from the "Profile" drop-down
list.
Note: Profiles 06-10 are disabled in the default set-
ting. To enable a disabled profile, select the profile
to enable from the "Profile" drop-down list then remove the uncheck [Disable this
profile].
4. Click [Save Current Settings].
1.16.2

How to disable a profile

1. Click [ ] on the Status bar then click [Manage Profile].
2. Select a profile number from the "Profile" drop-down list.
3. Check [Disable this profile].
The profile enabled at section 1.16.3 cannot be disabled.
1.16.3

How to activate a profile

1. Click [ ] on the Status bar then click [Manage Profile].
2. Click the profile number you wish to activate.
The confirmation message "Settings will be changed to
Profile xx. Do you wish to continue?" appears.
3. Click [Yes] to activate the selected profile. Click [No] to
cancel.
] on the Status bar then click [Manage Pro-
1. INTRODUCTION
Profiles
(enabled)
1-15