How To Enter Ship Speed - Furuno FMD-3200 Operator's Manual

1.10

How to Enter Ship Speed

The speed can be entered from a log (STW) or GPS (SOG), or manually on the menu.
Note that FURUNO GPS Navigator GP-150 provides both COG and SOG.
1. Right-click anywhere in the [Own ship information] box to show the context-sensi-
tive menu.
2. Click [Setting].
3. Click [System Sensor Settings] or [Local System Settings] as applicable.
4. Click the [SPD] tab.
Stablilization
mode
LOG/GPS
selection
Fill circle for automatic speed input
Set speed and course of drift
Fill circle to use radar as source for speed and course
Fill circle for manual speed input
SPD page, local sensor
1. INTRODUCTION
Speed
sensor
list
1-9