KS Emulation
Printer
Protocol
KS
(from page 110)
Define CR
Code
CR = CR*
CR = CR + LF
Alt Set 80-9F
Control Code*
Printable
Define CR Code
The Define CR code option controls the action of the printer when it receives a Carriage Return code (hex
0D) from the host computer. If this feature is enabled, each time the printer receives a Carriage Return, it
inserts an additional Line Feed code (hex 0A) into the data stream. Do not use this feature if the host
computer sends Line Feeds to the printer.
•
CR = CR (factory default). Does not insert an extra Line Feed after each Carriage Return.
•
CR = CR + LF. Inserts an extra Line Feed after each Carriage Return.
CR Bold Select
This option determines whether CR (0x0D) will turn on the bold attribute.
•
Enable (factory default). The text after CR will be printed as bold together with the text before CR.
•
Disable. Normal CR function.
Autowrap
This option defines the printer actions when print data is received past the forms width setting.
•
With LF+CR (factory default). Performs an automatic carriage return and line feed when data is
received past the forms width.
•
With CR. Performs an automatic carriage return (without line feed) when data is received past the
forms width.
•
Disable. Discards any data past the forms width.
CR Bold
Autowrap
Select
Enable*
With LF+CR*
Disable
With CR
Disable
Emulation
Extend
Disable*
Enable
Define LF
Printer
Code
Select
LF = CR + LF*
Disable*
LF = LF
Enable
111