Printronix P8000 Series Administrator's Manual page 148

Define CR (Carriage Return) Code
This parameter forces the printer to insert an automatic Line Feed code into the data stream whenever a
Carriage Return code occurs. This is to be used only if the host computer does not send line feeds to the
printer.
•
CR = CR (factory default). Does not perform a line feed. The next print position will be print position 1
of the current line.
•
CR = CR + LF. Performs an automatic line feed. The next print position will be print position 1 of the
next line.
Define LF (Line Feed) Code
This parameter forces the printer to insert an automatic Carriage Return code into the data stream
whenever a Line Feed code occurs. This can be used in most installations, but it is required if the host
computer does not send carriage returns to the printer.
•
LF = LF (factory default). Does not perform an automatic carriage return. The next print position will
be the current print position of the next line.
•
LF = CR + LF. Performs an automatic carriage return. The next print position will be print position 1 of
the next line.
Autowrap
This parameter determines if text will wrap to the next line when the line of text exceeds the right margin.
•
Disable (factory default). Truncates the text beyond the right margin until a CR or CR + LF is
received.
•
Enable. Automatically inserts a CR + LF after a full print line.
PGL SFCC
You can specify which hex code (1-255) will be used as the Special Function Control Code (SFCC). The
factory default setting is 126. The SFCC denotes that the following data is a PGL command.
PI Slew Range
You can specify how many lines the paper will feed.
•
16 (factory default). A paper slew of 0-15 will move 1-16 lines.
•
15. A paper slew of 1-15 will move 1-15 lines. A paper slew of 0 will move 1 line.
CR Edit
This parameter determines if a carriage return will be followed by a line feed.
•
Disable (factory default). The printer ignores all carriage returns that are not followed by line feeds.
•
Enable. The printer processes all carriage returns, even for those that are not followed by line feeds.
Select Font
Select Font specifies which language is currently selected for use with the PGL. Refer to IGP/PGL Font
Set Menu on page 155. for available selections.
Slash 0
This parameter allows you to print the numeral "0" with or without the slash. This option applies to all
character sets except OCR A and OCR B.
148