Printronix P8000 Series Administrator's Manual page 137

Character Set
This parameter selects a character set for the Epson emulation, as shown in Epson FX Character Set
Menu on page 138.
NOTE: When OCR-A or OCR-B is selected as the print language, the Font Attribute Typeface option
under the LinePrinter Plus menu (page 102) is changed to OCR-A or OCR-B, respectively.
To use one of these sets, choose the desired group heading (such as European Sets) and press ENTER.
Then choose the desired set within that group (such as Roman 8) and press ENTER. Both the group and
the desired set will be starred to indicate your selection. The UTF-8 selection allows printing of UTF-8
encoded Unicode ™. Character sets are shown in detail in the Character Sets Reference Manual.
20 CPI Condensed
Compressed print characters are narrower than the normal character set. This is helpful for applications
where you need to print the maximum amount of information on a page.
•
Enable (factory default). Prints about 60 percent of the width of normal characters when compressed
print is chosen by the host computer. For example, a 12 CPI Draft font will compress to 20 CPI.
•
Disable. Does not compress print widths, even if condensed print is chosen by the host.
Alt. Set 80-9F
•
Control Code (factory default). Interprets data in the range of hex 80 through hex 9F as a control
code.
•
Printable. Prints data in the range of hex 80 through hex 9F.
137