Printronix P8000 Series Administrator's Manual page 116

Typeface (H-Series)
This parameter allows you to select the typeface for printing in the emulation.
•
LQ. Default value for Hanzi Big5/Hangul.
•
Near LQ. Default value for Hanzi GB/Kanji printer.
•
Normal
•
Hi-Speed
•
Super Hi-Speed
•
Ultra Hi-Speed
Styling Typeface (H-Series)
•
SONG. Only for Hanzi GB printer.
•
MING. Only for Hanzi Big5 printer.
•
Mincho. Only for Kanji printer.
•
Myungjo, Gothic. Only for Hangul printer. Myungjo is the default value.
Prop. Spacing (Proportional Spacing)
Each printed character is contained inside a character cell. The width of the character cell includes the
character and the space around the character. This menu only works in ASCII mode and is not available
for the H-Series Hangul product.
•
Disable (factory default). Each character cell is printed with the same width. Each column in the
printed text will line up.
•
Enable. The width of each character cell varies with the width of the character. For example, [i] takes
less space to print than [m]. Using proportional fonts generally increases the readability of printed
documents, which gives text a typeset appearance.
Bold Print
•
Disable (factory default). Text is printed normally.
•
Enable. Text is printed with a heavy line thickness.
Italic Print
•
Disable (factory default). Text is printed normally.
•
Forward Slant. Text is printed with a forward slant.
•
Backward Slant. Text is printed with a backward slant.
116