The Igp/Pgl Emulation Submenu - Printronix ProLine 5 Series Manual

The IGP/PGL Emulation Submenu

Emulation
IGP/PGL
Define CR Define LF
Code Code
CR = CR* LF = LF*
CR = CR + LF LF = CR + LF
Select Font Slash 0
Disable*
See page 4–26
Enable
Ext Execute UPC
Descenders
Copy
Disable* Enable*
Enable Disable
Optimized I-2/5
Ratio Selection
Leading Zero*
Disable*
Enable Trailing Space
X2 DPD
Define CR Code (Carriage Return)
This parameter forces the printer to insert an automatic Line Feed code into the data
stream whenever a Carriage Return code occurs. This is to be used only if the host
computer does not send Line Feeds to the printer.
CR = CR. Does not perform a line feed. The next print position will be
print position 1 of the current line.
CR = CR + LF. Performs an automatic line feed. The next print position
will be print position 1 of the next line.
4–20
* = Factory default
Autowrap Select
SFCC
Disable* 1–125
Enable 126*
127–255
Select LPI Auto
Uppercase
6* , 8, 9, 10 Disable*
Enable
Compressed Ignore
CPI Char.
Disable*
Light Font
Ignore
Dark Font
Mode
Disable*
Enable
True Form Printer
Slew PI Line
Enable* Enable*
Disable Disable
PI slew CR edit
range
16* Disable*
15 Enable
Skip Cmd Power On
Prefix IGP/PGL
Enable* Enable*
Disable Disable
Compatbl. Expanded
Mode
Font
None* Scalable*
MVP Block
Select
L150
Alt Block 1
Char
P3000
Alt Block 2
0*
P6000
0–255
P9000
Configuration Menus