Printronix P8000 Series Administrator's Manual page 229

5. Start a Windows Command Prompt session.
6. Navigate to the directory with the target firmware (e.g., c:\download).
7. Execute FILENAME.exe as follows:
Connection Type
Parallel
Serial
USB
Ethernet
IMPORTANT DO NOT interrupt the downloading process once it has started. Interrupting a
download will leave the flash memory on the controller PCBA incompletely loaded,
and the printer may not boot up.
Figure 30 Setting Printer Properties Sharing Options
FILENAME –a -pb <Enter>
mode COM1:9600,N,8,1 <Enter>
mode LPT1=COM1 <Enter>
FILENAME –a -pb <Enter>
FILENAME –a –pbSharedName <Enter>
where SharedName of the printer is the
'Share name' entered during installation.
FILENAME -n xxx.xxx.xxx.xxx <Enter>
where xxx.xxx.xxx.xxx represents the IP address.
Enter Command
229