Configuration Utility Zpl2 Emulation Menu - Printronix M4L Administrator's Manual

Configuration Utility ZPL2 Emulation Menu

Darkness
Print Speed
Tear Off
Print Mode
Print Width
Media Pwr Up
Head Close
Label Top
Left Position
NOTE: ZPL2 emulation menu item settings may be affected by Common menu item settings.
Range = 0 to 30
Range = 1 to 4 ips
Range = -120 to 120 dots
Tear Off or Peel Off
Range = 0.01 to 4.10 inch
No Motion, Length, Calibration or Feed
No Motion, Length, Calibration or Feed
Range = -120 to 120 dots
Range = -9999 to 9999 dots
Default = 16
Default = 2 ips
Default = 0
- dot value, label TOF stops below Tear Bar.
+ dot value, label TOF stops above Tear Bar.
Default = 4.00 inch
Default = No Motion
Default = No Motion
Default = 0 dots
Default = 0 dots
29