Printronix P8000 Series Administrator's Manual page 180

PUM (Position Unit Mode)
This menu only has an effect when the Analyzer emulation is set to ANSI. It has two different possible
values:
•
Decipoints (factory default). The printer interprets ANSI escape sequence parameters as decipoint
values.
•
Lines/Columns. The printer interprets ANSI escape sequence parameters as line or column counts.
Default Data Processing
Your printer has two "Data Process" typefaces: Normal & Enhanced. This menu item is effective when
using the Arabic Windows Driver:
•
Data Processing. The normal typeface used for Data Processing.
•
Enhanced DP (factory default). Thisversionof Data Processingtypeface is printed at a lower speed
than the normal "Data Process" typeface. However, the "Enhanced DP" is a better quality than the
normal "Data Process" typeface.
NOTE: When using SEDCO Windows printer driver, all menu items under the analyzer are ignored
except for this menu item. If the "Printer Font Name" in the driver properties under "Device
Settings" is set to "Data Process", then the value of "Default DP" menu item selects between the
"Data Processing" and "DP Enhanced" typefaces.
Wrap Around
When the user sends a long line (longer than what the printer expects) to the printer, the remaining
characters will be printed on the next line if the Wrap Around menu item is enabled. If this item is disabled
the printer will not print the rest of the line. The default is Disabled.
Form Feed Absorb
When Form Feed Absorb is enabled and a form feed character (0C hex) is received, it will not have an
effect. If Form Feed Absorb is disabled, then a form feed character will advance the paper to the next top
of form, and move the logical print position to the first character column. The default is Disabled.
Custom Settings
This menu item should be set to zero for normal behavior. To use UTF-8 as your Right Code Set, set the
"Custom Settings" to three. The default is Zero.
180